Epoxy HR is a heat-resistant coating. two component, high solid phenolic epoxy coating.
 
Suitable for temperatures up to 205 °C (401 °F) continuous and also suitable for cryogenic temperatures, down to -196 °C (-321 °F), can be used for both insulated and non-insulated substrates.
 
Epoxy HR has very good water resistance, which gives it excellent corrosion protection properties. It significantly prolongs the lifetime of an asset, reducing the maintenance need and the risk of corrosion under insulation (CUI) – avoiding unnecessary and costly shutdowns.
 
Epoxy HR is suitable for maintenance situations and can be applied on hot substrates up to 150 °C and ST2 surface preparation. Has proven its excellent performance over the last 20 years of successful applications globally.
 
The standard aluminium version may be used as primer, mid coat or finish coat. RAL 9006 is a specialty finish where a bright aluminium effect is required and is only used as a final coat/finish coat. Suitable for properly prepared carbon steel, galvanised steel, stainless steel and aluminium substrates.
 
Available in an 5Lunit
Typical Use:
Protective: Designed as corrosion protection for surfaces operating at elevated temperatures where long corrosion protection is desired. Suitable for insulated and non insulated surfaces.
 
Product Categories
Heat resistant coatings
Anticorrosive primers
New construction primers
 
Technology
Epoxy Heat Resistant Paint
 
Substrate
Aluminium
Carbon steel
Galvanized steel
Stainless steel
Coated surfaces
Shop primed steel
 
Certificates and Approvals
Tested in accordance to ISO 19277:2018